No-Wire Test Tube RackFor 25-30mm Tubes, 90 Places, WhiteA great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds.Made of a special blend of autoclava..
Sturdy polypropylene plastic rack holds 50 pipettes in a vertical 5 x 10 arrangement. Top and middle decks have 16 mm diameter holes; bottom deck holes are tapered from 16 mm to 6 mm diameter• Pipette tips will not contact table surface
• End plates have handles for easy carrying
• Steam autoclavabl..
Polypropylene plastic stand has a two-section top plate; one with 10 holes, 14mm in diameter, the other with 18 holes, 11mm in diameter. Holes in the lower plate are 4mm in diameter and support the tips of the pipettes as they are held in the stand. • For safe and orderly storage of up to 28 pipette..
This styrene plastic tray can be used in drawers or on the benchtop for storing pipettes and can also be used for soaking pipettes before cleaning.• Scalloped rims hold 16 small or 7 large pipettes • Center support holds 12 short pipettes in a perpendicular direction..
Made of stainless steel without any plastic coating, this universal rack holds all types of pipettors including the Gilson Pipetman®.
• Five positions, sloping back and open front notches hold the pipettors
• Suitable for free standing on a bench top..
Securely holds 1.5ml microcentrifuge tubes in an 8 or 20 capacity disk for simultaneous vortexing.
• Tube contents are mixed by holding the shaft against the rubber pad of a vortexer
• Made of polypropylene with a 16.5cm (6½") long Delrin® shaft and 2.54cm (1") diameter ball handle..
Securely holds 1.5ml microcentrifuge tubes in an 8 or 20 capacity disk for simultaneous vortexing.
• Tube contents are mixed by holding the shaft against the rubber pad of a vortexer
• Made of polypropylene with a 16.5cm (6½") long Delrin® shaft and 2.54cm (1") diameter ball handle..
Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson).
• Useful for transport, incubation and storage of contact plates; convenient organization
• Steam autoclavable at 121ºC (250ºF)..
Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson).
• Useful for transport, incubation and storage of contact plates; convenient organization
• Steam autoclavable at 121ºC (250ºF)..
These racks have 12 places (3 x 4 rows) for 300ml Biological Oxygen Demand Bottles.
•Stackable for storage or refrigeration allowing 16.7cm (6⁹/₁₆") between racks
•Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)..
Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). • Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter)
• Heat-cured epoxy coating is unaff..
This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range: -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkaliTemperat..
Epoxy-coated steel wire rack holds 15 conical bottom 15ml centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes.
•Generously spaced for easy handling
•Heat-cured epoxy coating is unaffected by organic solvents, salts,..
Heavy-duty rack protects your expensive bottles keeping them from rolling, tipping and striking against one another. Holds 150mm and 300mm long bottles with ample space in between to allow for the screw cap diameter and provide convenient handling.
• Epoxy-coated steel rods provide durability and e..
For safe, convenient storage of Pasteur pipettes or transfer pipettes. Pipette cans not included.• Individual compartments store up to four 5.7 x 5.7cm (2¼ x 2¼") pipette sterilization cans
• Sits flat on benchtop; supports pipettes at an angle to allow for easy selection and use
• Epoxy coated stee..
Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
•Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis
•Will withstand a temperature range of -223ºC (-3..
Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
•Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis•Will withstand a temperature range of -223ºC (-36..
Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning.
•Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis
•Will withstand a temperature range of -223ºC (-3..