Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.
• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Check ValvesSize: ³⁄₃₂ in. Bore, ⁵⁄₁₆ to ¼ in. Taper, LDPE (Pack of 12)Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves.Operate positively; instantly blocks flow if direction changesBuilt-in arrows indicate direction of free flowNeoprene disk, no metalMaxi..
Check ValvesSize: ¼ in. Bore, ½ to ⅜ in. Taper, LDPE (Pack of 12)Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves.Operate positively; instantly blocks flow if direction changesBuilt-in arrows indicate direction of free flowNeoprene disk, no metalMaxim..
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.
• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Complete 72-Piece Plastic Fitting AssortmentMake the Right Connection - 72 piecesStop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups. Clear, hinge-top, polystyrene storage box makes it easy ..
A needle type, Teflon® O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.
• Outlet accepts 16mm I.D. (⅝") tubing
• F30852-0000 fits standard steel drums
• H30857-0000 has a male threaded outlet that accommodates garden hose coupling st..
A needle type, Teflon® O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob.• Outlet accepts 16mm I.D. (⅝") tubing
• F30852-0000 fits standard steel drums
• H30857-0000 has a male threaded outlet that accommodates garden hose coupling sta..
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and oth..
Pinch valve allows control of fluid flow without drips.
• Squeeze soft silicone body to permit flow
• Release pressure to suspend flow
• Withstands approximately 16 lbs. of pressure
• Made of Teflon®, stainless steel and polypropylene for maximum chemical-resistance
• Steam autoclavable at 121°C (25..
Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (¹⁄₁₆ to ¾") O.D. • Spring-loaded jaw will remain closed for safety when not in use
• Replaceable, hardened steel blade makes clean, straight cutsNote: Not recommended for latex tubing...
Polyethylene Drying Tubes with Polypropylene Tube FittingsSize: 4 in., Pack of 12Can Be Filled with Desiccant of Your ChoiceEach tube is supplied with two polypropylene fittings with serrated tapered end that accept 6.4 to 9.5mm (¼ to ⅜") I.D. tubingUnbreakable polyethylene straight tubes; 16mm I.D..