Acetal Mid-Range Plastic Tubing ClampsFor ⅛ to ⁷⁄₁₆ in. O.D. Tubing (Pack of 12)Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tub..
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Heat Resistant Biohazard Autoclave Gloves, 5 inch GauntletSafely Unload Your Autoclave Soft, pliant, all-cotton terry cloth gloves are superb for handling hot objects out of the autoclave or oven, or for other heat protection in the lab, school or industry. Note: Gloves are not waterproof and s..
A highly visible, nylon indicator ball housed in clear polycarbonate rotates in a circular channel during flow for simple flow monitoring.
•Continuity and relative flow rate indicated by speed of ball’s rotation
•Arrow shows direction of flow
•A minimum water flow rate of 100/ml per minute in a hori..
Clear TapeFor Protective Labeling System, 36yd Length, 1¹/₂ in. Width, 1 in. Core (Pack of 2)Protective Labeling System provides labels that stand up to harsh laboratory conditions. The clear tape protects labels from the freezer, autoclave, acids, alkalis and organic solvents. Test result..
The exceptionally fine tips of these forceps are coated with brown Fluo-Kem® Teflon® FEP.
• Complies with FDA regulations covering direct contact with food.
• Serrated, curved tips
TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc...
Desiccant in a CartridgeSize: 4.5 in. DiameterConvenient, easy-to-handle cartridges with Natrasorb® TI indicating silica gel beads fit Scienceware® “Space Saver” Desiccators in addition to other plastic desiccators of similar size.Beads change color from blue when dry to pink when moistContained in ..
Maxi Plastic Tubing Clamps; For Tubing Under ¾ in. O.D. (Pack of 6)Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tubing under 4.7m..
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Nylon Screw-Clamp Compressor for Tubing up to ¼ in. O.D.Side opening tube clamp permits installation onto tubing without disconnecting from apparatus or interrupting operation.Constructed of durable nylon for long life and good chemical resistanceAccepts any tubing up to 6.4mm (1/4") O.D..
Tube clamp is molded of strong, durable plastic with serrated jaws 2.7cm (1¹⁄₁₆") long. Attach at any point on tubing without disconnecting tubing.• Operate with one hand; locks closed and opens when the locking tab is released
• Fits tubing up to 1.3cm (½") O.D.; wall thickness of 0.82mm (1/32") or..
Polypropylene Stopcock with PTFE PlugFor ¼ to ⅜ in. I.D. TubingPolypropylene plastic stopcock body has Teflon® PTFE plug, washer and bright red handle. Plug is 3 way for vacuum draw, shut-off and vacuum releaseTaper fits on desiccator portUse on Desiccator Models: F42010, F42012, F42020, F42022, F42..
Polypropylene tissue grinder efficiently homogenizes tissue and cells in microcentrifuge, centrifuge and grinding tubes. • Cone tip tapers from 8.2mm (0.33") down to 2.9mm (0.12") in a length of 19.8mm (0.78") and has a rounded end
• Overall length: 21cm (8¼")
• Shaft diameter: 4.7mm (³⁄₁₆")
• Steam..
Molded clear polystyrene body with smooth connecting barbs allow easy installation of these flow meters. • Internal flow channel diameter: 5mm• Paddle wheel shell: 25mm
• Overall length: 51mm• Maximum recommended pressure: 10 p.s.i.g.• Minimum flow: 0.5 LPM / Maximum flow: 10 LPM
• Not for use with ..
Sampler SyringeSize: 100ml, 11¾ in., PlasticSample liquids quickly and easily - simply squeeze the bulb, submerse the syringe in liquid, and then release the bulb to draw liquids into the syringe. Can be inverted to contain liquid in the graduated bulb
Low-density polyethylene squeeze bulb; graduate..
Offers on/off and fine control so accurate that it replaces stopcocks in many applications. • Can be installed without disconnecting tubing or interrupting operation
• Accepts flexible tubing up to 14mm (½") O.D• Molded of Acetal plastic; autoclavable• Resistant to acids, alkalis and organic solvent..