Securely holds 1.5ml microcentrifuge tubes in an 8 or 20 capacity disk for simultaneous vortexing.
• Tube contents are mixed by holding the shaft against the rubber pad of a vortexer
• Made of polypropylene with a 16.5cm (6½") long Delrin® shaft and 2.54cm (1") diameter ball handle..
Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). • Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter)
• Heat-cured epoxy coating is unaff..
This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes.
• Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis
• Temperature range: -223ºC (-369ºF) to 121ºC (250ºF); autoclavable..
Poxygrid Centrifuge Tube RackFor 50ml Tubes, 16 Places, BlueMade of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalisTemperature range -223ºC (-369º..
This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack.
Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81")Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkaliTemperat..
Poxygrid Centrifuge Tube RackFor 50ml Tubes, 36 Places, BlueMade of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalisTemperature range -223ºC (-369º..
Poxygrid Centrifuge Tube RackFor 50ml Tubes, 8 Places, BlueMade of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square.Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalisTemperature range -223ºC (-369ºF..
PrepSafe Floating Microcentrifuge Tube RackFor 1.5-2.0ml Tubes, 28 PlacesProtect your samples from loss and contamination. Hold 1.5ml or 2.0ml microcentrifuge tubes securely in a water bath, in an ice bucket, or on the benchtop. Immobilizing tabs allow tubes to be stored securely; ensures that the c..
PrepSafe Microcentrifuge Tube Mini Floating Rack; No Vortexing AttachmentFor 1.5-2.0ml Tubes, 12 Places, Fits 1000ml Beakers, Polypropylene, FuchsiaUnique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when ..
PrepSafe Microcentrifuge Tube Mini Floating Rack; No Vortexing AttachmentFor 1.5-2.0ml Tubes, 12 Places, Fits 1000ml Beakers, Polypropylene, NaturalUnique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed ..
PrepSafe Microcentrifuge Tube Mini Floating Rack; Vortexing AttachmentFor 1.5-2.0ml Tubes, 12 Places, Fits 1000ml Beakers, Polypropylene, FuchsiaUnique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed whe..
PrepSafe Microcentrifuge Tube Mini Floating Rack; Vortexing AttachmentFor 1.5-2.0ml Tubes, 12 Places, Fits 1000ml Beakers, Polypropylene, Neon YellowUnique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed..
PrepSafe Microcentrifuge Tube Mini Floating Rack; Vortexing AttachmentFor 1.5-2.0ml Tubes, 12 Places, Fits 1000ml Beakers, Polypropylene, TurquoiseUnique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed w..
ProCulture Round Microcentrifuge Floating Bubble RackFor 0.5ml Tubes, 20 Places, Fits in 1000ml BeakersIncubate 8 to 20 Microtubes in 37°C Water Baths or BeakersMade especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use i..
ProCulture Round Microcentrifuge Floating Bubble RackFor 1.5ml Tubes, 20 Places, Fits in 1000ml BeakersIncubate 8 to 20 Microtubes in 37°C Water Baths or BeakersMade especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use i..
ProCulture Round Microcentrifuge Floating Bubble RackFor 1.5ml Tubes, 8 Places, Fits in 400ml BeakersIncubate 8 to 20 Microtubes in 37°C Water Baths or BeakersMade especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and perfect for use in ..
Reversible PCR and Microcentrifuge Tube RackFor 0.2ml or 1.5-2.0ml Tubes, 80 Places, Assorted Colors (Pack of 5)Blue, Green, Orange, Yellow, RedPerfect for benchtop use or freezer storage, these compact, double-sided polypropylene racks accommodate 0.2ml thin-walled PCR tubes on ..
Reversible PCR and Microcentrifuge Tube RackFor 0.2ml or 1.5-2.0ml Tubes, 80 Places, Assorted Colors (Pack of 5)Blue, Green, Orange, Yellow, PinkPerfect for benchtop use or freezer storage, these compact, double-sided polypropylene racks accommodate 0.2ml thin-walled PCR tubes on one side while the ..
Reversible PCR and Microcentrifuge Tube RackFor 0.2ml or 1.5-2.0ml Tubes, 80 Places, Natural (Pack of 5)Perfect for benchtop use or freezer storage, these compact, double-sided polypropylene racks accommodate 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2...
Specifically designed for incubating 1.5 ml microcentrifuge tubes, this rack includes a hold-down disk which maintains a constant pressure on the tube caps and prevents them from opening during internal air expansion.
•The polypropylene disk with threaded handle screws into the foam-filled TPX® poly..