Search Criteria
Products meeting the search criteria
Brand: Bel-Art_Stock Clearance
Model: F18228-0000
Acetal Mid-Range Plastic Tubing ClampsFor ⅛ to ⁷⁄₁₆ in. O.D. Tubing (Pack of 12)Plastic Tubing Clamps are durable and will not rust or corrode. Select from 3 sizes for best tubing fit.Mini Tube Clamp with single position on/off gives positive shut-off with fingertip control; use for thin-walled tub..
Brand: Bel-Art_Stock Clearance
Model: H19716-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art_Stock Clearance
Model: F19625-0000
Complete 72-Piece Plastic Fitting AssortmentMake the Right Connection - 72 piecesStop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups. Clear, hinge-top, polystyrene storage box makes it easy ..
Brand: Bel-Art_Stock Clearance
Model: H19728-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art_Stock Clearance
Model: H19727-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art_Stock Clearance
Model: H21010-0000
Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (¹⁄₁₆ to ¾") O.D. • Spring-loaded jaw will remain closed for safety when not in use
• Replaceable, hardened steel blade makes clean, straight cutsNote: Not recommended for latex tubing...
Brand: Bel-Art_Stock Clearance
Model: H21011-0000
Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (¹⁄₁₆ to ¾") O.D. • Spring-loaded jaw will remain closed for safety when not in use
• Replaceable, hardened steel blade makes clean, straight cuts Note: Not recommended for latex tubing...
Brand: Bel-Art_Stock Clearance
Model: F19655-0000
“5 in 1” Straight Tubing ConnectorsSize: 3½ in., Polypropylene (Pack of 12)Fits 5 sizes of tubing and will connect the same size tubing on both ends, or will act as a reducer for any combination within the range. Inside diameter increases with notch size when unneeded length is cut off for unrestric..
Brand: Bel-Art
Model: F19626-0000
28-Piece Plastic Fitting KitEconomical and PracticalCompatible with tubing from 3.2 to 12.7mm (⅛ to ½"), these fittings are for the most common lab connections.Molded of autoclavable FDA grade polypropylene except quick disconnect fittings which are polyethylene and not autoclavable or FDA gradeKit ..
Brand: Agilent
Model: 0890-1763
Agilent 1/16 od 0.007 id (0.18mm) 1.5m PEEK tbng..
Brand: Agilent
Model: 0890-1915
Agilent 1/16in x..005in x 5 ft Tubing, PEEK, Red..
Brand: Agilent
Model: 0890-1762
Agilent 1/16in x.010in x 5 ft Tubing, PEEK, Blue..
Brand: Agilent
Model: 5180-4196
Agilent 1/8in x .065in Copper Tubing,50 Ft Coil..
Brand: Agilent
Model: 8710-1931
Agilent Blades for tubing cutter 5/PK..
Brand: Agilent
Model: 5181-8836
Agilent Capillary tubing cutter, 4/PK..
Brand: Agilent
Model: 5021-7107
Agilent Copper tubing, 1/8in 12 ft length..
Brand: Agilent
Model: 5183-4620
Agilent Cutting tool, for fused silica tubing, with rotating diamond blade..
Brand: Agilent
Model: G3280-60555
Agilent Drain tubing assembly for ICP-MS..
Brand: Agilent
Model: G1820-65515
Agilent Drain Tubing for aqueous or organic waste, ETFE core, 4 mm id, 6mm OD, 2.5 m length per unit
Agilent Drain Tubing for aqueous or organic waste, ETFE core, 4 mm id, 6mm OD, 2.5 m length per unit.Suitable for use for aqueous or organic samples from spray chamber drain peristaltic pump tubing or Autosampler drain to waste vessel. Used with all Agilent ICP-MS models...
Brand: Agilent
Model: 5005-0026
Agilent Easy-fit Peristaltic pump tubing, optional for organic solvent high matrix sample and ISTD uptake, 12/pkFlared-end yellow PVC solvent flexible, 2-stop, black/black tabs, 0.76 mm id. Recommended for common organic solvents used with ICP-MS. Optional for sample and internal standard uptake for..
