Search Criteria
Products meeting the search criteria
Brand: Bel-Art_Stock Clearance
Model: H19716-0000
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Brand: Bel-Art_Stock Clearance
Model: F19625-0000
Complete 72-Piece Plastic Fitting AssortmentMake the Right Connection - 72 piecesStop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups. Clear, hinge-top, polystyrene storage box makes it easy ..
Brand: Bel-Art_Stock Clearance
Model: H19728-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art_Stock Clearance
Model: H19727-0000
Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and can be combined to make reducing combinations.
• Consists of two barbed polyethylene plastic connectors which assemble tightly together with a male-female center taper.
• Very useful in connecting and disconnecting vacuum lines and ot..
Brand: Bel-Art_Stock Clearance
Model: H21010-0000
Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (¹⁄₁₆ to ¾") O.D. • Spring-loaded jaw will remain closed for safety when not in use
• Replaceable, hardened steel blade makes clean, straight cutsNote: Not recommended for latex tubing...
Brand: Bel-Art_Stock Clearance
Model: F19960-0000
Polyethylene Drying Tubes with Polypropylene Tube FittingsSize: 4 in., Pack of 12Can Be Filled with Desiccant of Your ChoiceEach tube is supplied with two polypropylene fittings with serrated tapered end that accept 6.4 to 9.5mm (¼ to ⅜") I.D. tubingUnbreakable polyethylene straight tubes; 16mm I.D..
Brand: Bel-Art_Stock Clearance
Model: F19962-0000
Polyethylene Drying Tubes with Polypropylene Tube FittingsSize: 8 in., Pack of 12Can Be Filled with Desiccant of Your ChoiceDrying tubes with tube fittings can be filled with desiccant of your choice. Each tube is supplied with two polypropylene fittings with serrated tapered end that accept 6.4 to ..
Brand: Bel-Art_Stock Clearance
Model: H21011-0000
Portable, pocket-sized cutter cuts flexible tubing from 1.6mm to 19mm (¹⁄₁₆ to ¾") O.D. • Spring-loaded jaw will remain closed for safety when not in use
• Replaceable, hardened steel blade makes clean, straight cuts Note: Not recommended for latex tubing...
Brand: Bel-Art_Stock Clearance
Model: F19655-0000
“5 in 1” Straight Tubing ConnectorsSize: 3½ in., Polypropylene (Pack of 12)Fits 5 sizes of tubing and will connect the same size tubing on both ends, or will act as a reducer for any combination within the range. Inside diameter increases with notch size when unneeded length is cut off for unrestric..
Brand: Bel-Art
Model: F19626-0000
28-Piece Plastic Fitting KitEconomical and PracticalCompatible with tubing from 3.2 to 12.7mm (⅛ to ½"), these fittings are for the most common lab connections.Molded of autoclavable FDA grade polypropylene except quick disconnect fittings which are polyethylene and not autoclavable or FDA gradeKit ..
Brand: Agilent
Model: 5062-2418
Agilent 1/16in Fittings and Ferrules, 10/Pk..
Brand: Agilent
Model: RMSH-4
Agilent Big Universal Trap, Helium, 1/4 in, 250 psigFitting Size: 1/4 inTrap Capacity: 750 ccGas Filter Type: Combination (Universal)Includes Indicator: NoDiameter (mm): 2.3 inLength: 17.5 in..
Brand: Agilent
Model: RMSHY-2
Agilent Big Universal Trap, Hydrogen, 1/8 in, 250 psigFitting Size: 1/8 inTrap Capacity: 750 ccGas Filter Type: Combination (Universal)Includes Indicator: NoDiameter (mm): 2.3 inLength: 17.5 in..
Brand: Agilent
Model: RMSN-4
Agilent Big Universal Trap, Nitrogen, 1/4 in, 250 psigFitting Size: 1/4 inTrap Capacity: 750 ccGas Filter Type: Combination (Universal)Includes Indicator: NoDiameter (mm): 2.3 inLength: 17.5 in..
Brand: Agilent
Model: 5062-8541
Agilent Fingertight fittings, long 1/16 in 10/PK..
Brand: Agilent
Model: 0100-2594
Agilent Fitting, internal reducer, 1/16 to 1/32 inch..
Brand: Agilent
Model: 5063-6591
Agilent Fitting-Fingertight PEEK for 1/16-in..
Brand: Agilent
Model: 0100-1516
Agilent Fitting-Fingertight PEEK for 1/16in..
Brand: Agilent
Model: 5065-9963
Agilent Flex capillary 0.17x900mm no fittings..
Brand: Agilent
Model: 5021-1820
Agilent Flex capillary, 0.12x105mm, no fittings..
