Menu
Your Cart

INNOTEG Thermal Desorption Tube Conditioner

INNOTEG Thermal Desorption Tube Conditioner
INNOTEG Thermal Desorption Tube Conditioner
New
INNOTEG Thermal Desorption Tube Conditioner
INNOTEG Thermal Desorption Tube Conditioner
INNOTEG Thermal Desorption Tube Conditioner

Due to the high sensitivity of thermal desorption technology and the need for optimal analytical quality, a clean and fully conditioned adsorption tube is essential. Thermal desorption tube conditioner is independently of the GC/MS system, eliminating the risk of system contamination during conditioning.

Application

The thermal desorption tube is heated to a constant temperature with nitrogen gas purging to remove the residual substances in the adsorption tube, so as to avoid interference with subsequent detection steps and ensure the accuracy of data in the experimental process. Widely used in environmental detection, indoor air quality, consumer goods quality detection, food and beverage, aroma and smell, air quality of cars.

Advantages

  • Compact and can be operated in fumehood
  • No tools required for handling the tubes
  • Patented gas control technology, independent pipelines for each tube
  • Protective cover to prevent touching hot surface during conditioning process
  • High pressure and low flow design to ensure steady flow

Features

  • Plug-in design, inert and take out the desorption tubes without tools
  • Overheat protection, automatically cut off the power supply when the temperature exceeds the threshold
  • Drying function to remove the residual moisture in the thermal desorption tubes and avoid affecting the adsorption effect of packing
  • Integrated timer with buzzer function
  • High pressure and low flow design to ensure flow stability
  • Simple and convenient operation panel: multi-parameter real-time display of data
  • Equipped with pressure gauge: real-time display system pressure and the gas supply situation
  • Patented air flow control technology ensures the uniformity of flow rate of all adsorption tubes. Up to 10 tubes can be conditioned at the same time
  • Rapid heating from room temperature to 350℃ in 3 minutes
  • Cool down to room temperature in 10 minutes after conditioning, reduce waiting time and improve efficiency

Technical Data

Model

INNOTEG T2110

Power supply

220V 50HZ

Machine power

300W

Adsorption tube number

10

Suitable adsorption tube size

¼ x 3.5IN

Adjustable safe temperature range (℃)

 Ambient temperature ~ 400℃

Accuracy of heating control *

±1℃

Input pressure

0~0.6Mpa

Aging flow

0~200ml/min

Dimensions (W x D x H, mm)

220 x 200 x 140

Total weight (g)

3500

Operating temperature (℃)

18℃ - 30

Operating humidity

20%-80%

 

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Status: Pre-Order
  • Reward Points: 1355
  • Model: T2110
  • SKU: INNOTEG_T2110